Gumout®
DOT 3 Brake Fluid
  • For ABS, disc and drum brakes
  • Conforms to DOT 3, 49CFR 571.116 and FMVSS 116, SAE-J1703

Available in 12 oz. and 32 oz.

DIRECTIONS:
Clean the top of the master cylinder reservoir and remover the fill cap.

Add fluid to the level specified by manufacturer and replace fill cap.

  1. FOLLOW VEHICLE MANUFACTURER'S RECOMMENDATIONS WHEN ADDING BRAKE FLUID OR SERVICING BRAKE SYSTEM.
  2. KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.
  3. STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER. KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ABSORBTION OF MOISTURE.
  4. CAUTION: DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS.
  5. NOTE: IF SPILLED ON PAINT SURFACE, RINSE IMMEDIATELY WITH WATER. DO NOT RUB OR WIPE THE AREA.
DOT 3 Brake Fluid
Need more information? Contact us here.